http://www.viewpoints.com/aboutme/joeybagadonuts Fri, 30 Jan 2009 03:18:29 GMT Reviews by joeybagadonuts http://www.viewpoints.com/Frigidaire-Washer-Affinity-Front-Load-review-d2df6 I have a Frigidaire Affinity Washer that is almost 2 years old, It worked well for the first year, than I started having problems with it draining.  I read the error code, E20, and looked up the problem, Clogged drain.  I took the hose off and cleaned it, found nothing, I then checked the pump, found a rubber check valve on the end, it seemed to be stuck, so I removed it and cleaned it also.  That did not work as well.  I than removed the rubber check valve and re-hooked up the hose.  I ran It through a cycle, and it seems to work now.  I will let you know more if another problem arrises.  Thanks for reading, and I hope this helps with anyones washer problems.  The fix takes about one half hour.  Note, The check valve seemed to be the problem, But it may be that the pump is getting weak, and could not open the check valve with the water pressure from the hose.  Time will tell in this case.  <br/>Thanks,  The real Joe The Plumber!... Fri, 30 Jan 2009 03:18:29 GMT http://www.viewpoints.com/Frigidaire-Washer-Affinity-Front-Load-review-d2df6 joeybagadonuts 2